Menu
« Back

Phenolic Insulation

Phenolic Insulation Board

Phenolic insulation is manufactured by a process in which a plastic foam forms an insulating core between two flexible tissue faced layers. It has a high closed cell content and fine cell structure.

Rigid phenolic insulation is produced by mixing high solids and phenolic resin with a surface acting agent. The heat created by the reaction evaporates a volatile liquid blowing agent in the mixture which produces a network of small bubbles in the material. The foam can be cured to create one of two forms of the product. It can be manufactured by a continuous process to create thin sheet material which is laminated with various facings and cut into boards.

Wetherby use the Kingspan Phenolic K5-EWB External Insulation Wall Board in the majority of their systems.


Phenolic Insulation – Thermal Performance

Rigid phenolic insulation products offer very good thermal insulating properties due to the very low thermal conductivity of phenolic foam, compared with rigid polyurethane or extruded polystyrene. It can actually be 50% more effective than other common insulation materials. Its low thermal conductivity allows specified thermal performance targets to be achieved with minimal thickness of insulation. This is particularly significant where space saving is important.


Physical Qualities of Phenolic Insulation

bullet point  Structure

Rigid Phenolic insulation has a high closed cell content and fine cell structure. It is lightweight, easy to transport , handle and install.

bullet point  Compressive Strength

Phenolic foams are produced with densities in the range of 35 kg/m³ to 200 kg/m³. High density boards have a good compressive strength and are suitable for some floors.

bullet point  Material Resistance

Rigid phenolic insulation is resistant to fungus and mould growth and will not sustain vermin.

bullet point  Heat Resistance

Rigid phenolic insulation can withstand continuous temperatures of up to 120 degrees C.

bullet point  Moisture Resistance

Moisture has a minimal effect on its thermal performance. Rigid phenolic insulation has a 95% (or greater) closed cell content which makes it highly resistant to moisture penetration. It also has a low water vapour permeance. Phenolic foam is also non-wicking. This means that if water enters the insulation system due to the vapour barrier becoming punctured, any moisture ingress is limited and confined to the punctured area. This ensures moisture does not build up and compromise the whole system.

bullet point  Stability

Rigid phenolic is dimensionally stable and can be cut accurately to achieve a snug fit in situations such as between rafters where airtightness will be improved.

bullet point  High Temperatures

Rigid phenolic insulation can withstand continuous temperatures of up to 120 degrees C.

bullet point  Fire Performance

The fire performance of phenolic foam is exceptional. It combines zero or very low flame spread with negligible smoke emission and a very low level of toxic gas emission. Phenolic foams which have very low thermal conductivities are used as alternatives to PUR or PIR foams where a self extinguishing, low smoke emission, material is required. Insulating materials are rigorously tested to British Standards and fire performance data, to meet the requirements of building regulations, is generally available from manufacturers.

bullet point  Recycling

Rigid phenolic insulation is non- biodegradable but waste material can be put back into the manufacturing process for reuse.


Thermal Properties of Phenolic Insulation

The λ−values and R−values detailed below are quoted in accordance with BS / I.S. EN 13166: 2008 (Thermal insulation products for buildings – Factory made products of phenolic foam (PF) – Specification).


Thermal Conductivity

The boards achieve a thermal conductivity (λ–value) of:

  • 0.023 W/m.K (insulant thickness 15–24 mm);
  • 0.021 W/m.K (insulant thickness 25–44 mm); and
  • 0.020 W/m.K (insulant thickness ≥ 45 mm).

Thermal Resistance

Thermal resistance (R–value) varies with thickness and is calculated by dividing the thickness of the board (expressed in metres) by its thermal conductivity. The resulting number is rounded down to the nearest 0.05 (m2.K/W).

Insulant Thickness Thermal Resistance

(mm)(m2.K/W)
200.85
251.15
301.40
351.65
401.90
452.25
502.50
552.75
603.00
703.50
753.75
804.00
904.50
1005.00
1105.50
1206.00
1256.25

Environmental Benefits of Phenolic Insulation

  •   Phenolic foam has very low embodied energy per unit thermal performance
    compared to other insulation material.
  •   Significant CO2 savings can be achieved compared to other insulation materials.
  •   Phenolic foam can make a significant contribution to help achieve CO2
    emission reduction targets required by the Kyoto Protocol.
  •   Phenolic foam ins available in both CFC and HCFC free forms.
  •   For NBS Plus Information, click here: NBS Plus

Fire Performance

Kingspan Kooltherm® K5 External Wall Board, and its rigid thermoset insulation core, are Class 0, as defined by the Building Regulations.
The rigid thermoset insulation core of Kingspan Kooltherm® K5 External Wall Board, when subjected to the British Standard fire test specified in the table below, has achieved the result shown.

Test Result: BS 5111–1: 1974 < 5% (Smoke Obscuration) (Negligible smoke obscuration)
Further details of the fire performance of Kingspan Insulation products may be obtained from the Kingspan Insulation Technical Service Department.


« Back