|









|
LIGHT
The EMMEDUE ® panels present a remarkable easiness of
handling, transport and assembling thanks to their very
reduced weight that permits their use in any condition.
The lightness of the panels matches, in any case, a very
remarkable stiffness, even prior of the completion with
structural concrete, that guarantees integrity to the panels
and correspondence between the panels and their use.
Prior of the concrete application, the weight per square
metre changes according to the type of panel: from 3,5 Kg/m2
to 5 Kg/m2.
Thanks to the lightness of the panel, any worker, even by
himself, can easily handle over 3 m2 of wall without difficulty.
RAPID ASSEMBLING
Several experiences carried out in all kinds of conditions,
in different countries of the world and with any kind of
labour have shown that the time required to realize buildings
following the EMMEDUE ® system is much shorter compared
to the conventional systems.
INEXPENSIVE
The EMMEDUE ® panels represent a real advantage both
for the final users and the contractors, since they permit
to attain better performances compared to the traditional
products and with far lower costs. The idea of having an
element, used at the same time both as a highly resistant
wall and heat and soundproofing insulating material, has
turned out to be undoubtedly successful and innovative.
To this regard, economic comparisons between EMMEDUE®
buildings and other traditional systems having equal performances
have shown a saving exceeding 20% as for the double panel
and 40% as for single panels. Furthermore, it should be
taken into account the considerable saving of time due to
the use of an industrial product that optimizes the assembling
sequences and reduces at the minimum the work of the building
site staff.
RESILLIANT
A lot of laboratory tests carried out in several countries
of the world as well as in Italy have shown the high load
resistance of the EMMEDUE ® panels. For example, tests
carried out on a finished single panel having dimensions
equal to 2700x1120x150mm, have shown that the same panel
can sustain loads above 1.700 KN.
These values are evidence of the strength capacity of the
EMMEDUE ® panels that is far greater than that of comparable
traditional structures.
ENERGY SAVING
The value of the K total heat transmittance of a wall realized
by a panel made up of a polystyrene slab of 4 cm (density
15 kg/m3) applied with plaster 3 cm thick on both sides
for a total thickness of 10 cm, is equal to 0.78 W/m2 K.
If the wall is realized using a a panel with polystyrene
slab of 8 cm (density 15 kg/m3), the calculated value of
the K heat transmittance is equal to 0,49 W/m2 K.
Such a heat insulation degree exceeds in a remarkable way
the peculiar values of the partitions or curtain walls obtained
with the traditional systems; this produces energy saving
equal to 40% both while heating and while cooling.
EXCELLENT ACOUSTICS
The soundproofing of the EMMEDUE ® panels is one of
the advantages of the building system. Verifications carried
out on EMMEDUE ® panels have given very good results,
thus demonstrating the suitability of the panels under the
most difficult weather conditions, in compliance with the
technical set of rules in force.
FIRE RESISTANT
The quality of the foam polystyrene used is F type, self-extinguishing
in compliance with the DIN 4102 rules. Fire resistance tests
carried out on PSME80 panels have shown a result higher
than REI120.
WIDE CHOICE OF FINISHES
The external walls realized by the EMMEDUE ® panels
can be finished using any of WBS's final coats including
WBS Polymer Cement Renders
WBS Silicone & Acrylic Thin Coat
Renders
WBS Brick Slips
EARTHQUAKE RESISTANT
Laboratory tests carried out on one EMMEDUE ® two-storey
prototype, true scale, have shown that the structure resist
and is not damaged by strains higher than those calculated
for a First Category Earthquake that is the maximum provided
for by the Italian seismic Standards.
The results obtained with these tests represent the scientific
evidence of what has been already naturally experimented.
In fact, buildings realized using the EMMEDUE ® system
have shown their aseismic characteristics in many countries
in the world, where the same have successfully overcome
the most severe natural tests.
CYCLONE RESISTANT
Buildings realized with the EMMEDUE ® system in areas
at high risk of cyclones have demonstrated their ability
to withstand the most devastating cyclones throughout the
years; thus empirically confirming the results already obtained
by calculation, that is to say that the EMMEDUE ® buildings
are extremely resistant to the complex strains and thrusts
due to the force emitted by cyclones.
|
|
|