A
versatile basecoat offering high levels of flexibility,
improved tensile strength & anti-crack resistance.
WBS UF Base
A
basecoat with excellent workability qualities. Can be
sprayed or applied using traditional methods. Ideal
as a basecoat for thin coat acrylic finishes.
WBS Bedding &
Scrim Adhesive (HP12)
HP12
uses high polymer technology, creating a cost effective
basecoat with enhanced adhesion for difficult substrates.
HP12 is also widely used for its flexibility and tensile
strength for thin coat systems. Incorporation of an
alkali resistant fibre mesh may be required.
WBS Bedding &
Scrim Adhesive (HPX)
HPX
is an ultra high-performance render incorporating high
polymer technology and fibres, it is generally used
on unusual substrates that require greater flexibility
and adhesion.
In addition HPX has proven to work exceptionally well
with a wide range of building boards. Incorporation
of an alkali resistant fibre mesh is usually required.
WBS Bedding &
Scrim Adhesive (K&A)
K&A
adhesive is a mineral based, bonding and reinforcing
filler with water repellent & vapour permeable properties.
It is ideal for use on the HECK external wall insulation
systems, using any type of insulation board. K&A’s
flexibility and tensile strength is ideal for use with
thin coat silicone & acrylic systems. Incorporation
of an alkali resistant fibre mesh is always required.
WBS Bedding &
Scrim Adhesive (ZF)
A
ready mixed, high-performance adhesive incorporating
high polymer technology and fibres. Being a cement free
paste, ZF is easy to apply, highly flexible, extremely
fine grained and offers outstanding adhesion.
Suitable for use on the HECK external wall insulation
system (using EPS insulation boards only) and is an
ideal product for use with thin coat silicone &
acrylic systems. Incorporation of an alkali resistant
fibre mesh is always required.
WBS Brick Slip
Adhesive (BA1)
BA1
is a polymer modified, high performance adhesive, ideal
for brick slip application, due to its tensile strength,
ease of application and flexibility.
Choosing the right basecoat
for your chosen WBS External Wall Insulation System
When considering the right adhesives to use on a particular
project, a number of variables should be considered, including
the substrate, the insulant type and the finial finish required.
The table below gives a good indication
as to which products should be used in various circumstances.
NOTE: Please
consult WBS Technical Department for other substrates such
as non-traditional housing, timber frame, steel frame, ICF,
SIP’s etc.
